Use this remarkable 100% heat removable
film as a topping or stabilizer on all fabrics that can
withstand an iron temperature of 260°-300° F (120°-140°
C). Great when giving a gift and you need instant stabilizer
removal or when your fabric cannot withstand moisture.
Trace intricate quilt patterns or designs that you want
to free motion stitch for a perfect guide to follow on
top of the fabric!
To use as a topping:
Place a piece of Heat N Gone on top
of the hooped item, bumpy side down, and secure with pins
or tape. Once the embroidery is complete, tear away as
much of the Heat N Gone as possible. Place your heated
iron to the top of the garment to remove the excess stabilizer.
Be sure your iron temp is a least 260° F (120°C).
To use as a stabilizer:
Place a piece of Heat N Gone within
the hoop with the item to be embroidered. Use a piece
at least one inch larger than the outer perimeter of the
hoop. The bumpy side of the stabilizer should be against
the fabric. Once the embroidery is complete, tear away
as much of the Heat N Gone® as possible. Follow the
steps above for removing any remnants left around the
design.
